Compatible Systems MicroRouter 900i Manual do Utilizador descarregar pdf (Página 53)

Section 7 - Maintenance - 53Microrouter CNC Machine User's Manual

7: Lubrication of Leadscrews

Z Axis Leadscrew Lubrication.

The Z axis has one leadscrew, fitted between the upper and lower

slideframe assemblies. Do not confuse the leadscrew with the two

sliderails, which also lie along the same plane.

Run the machine head up fully, to gain access to the bottom end of

the leadscrew. Spray lubrication directly onto the exposed surface

of the leadscrew.

Run the machine head down fully, to gain access to the opposite

end of the leadscrew. Spray lubrication directly onto the remaining

surface of the leadscrew.

Finally, run the machine head up and down along the Z axis, to

distribute lubrication along the full length of the leadscrew.

Location

Look between upper

and lower slideframe

assemblies.

Lubricate

along the

leadscrew

(arrowed).

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 93 94

Sem comentários

Compatible Systems MicroRouter 900i Manual do Utilizador Página 53