Compatible Systems MicroRouter 900i Manual do Utilizador descarregar pdf (Página 33)

Section 5 - Preparing Tooling Hardware - 33Microrouter CNC Machine User's Manual

Performing a Manually Requested Tool Change.

Before beginning a manual tool change operation, we recommend

you home all three machine axes. When all three machine axes are

at their home positions, the maximum amount of free space will be

available in the working area, allowing easier access to the tool

holder and the easy change collar.

Performing an Automatically Requested Tool

Change during the running of a CNC program.

On reading a tool change operation line in your CNC program, all

three machine axes will move to their home positions, via an

intermediate point, if programmed.

At this point, the software will pause the CNC program and a

message window will be displayed, prompting you to manually

change tools.

Always wait for the spindle and machine axes to stop moving, before

attempting to open the safety guard door.

Replace the current tool number with the tool number specified in

the software message window (the tool profiles allocated to each

tool number may be listed at the beginning of your CNC program).

Close the safety guard door and clear the software message window

to resume your machining.

Never open the safety

guard door and enter

the working area when

the spindle or machine

axes are moving.

Safety First !

5: Performing a Tool Change

When two of more tools

are used in the same

CNC file:

Your new tool MUST be

refitted to laminate

trimmer and machine

head in exactly the

same position used

when originally

configuring its Z tool

offset value.

Note

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 93 94

Sem comentários

Compatible Systems MicroRouter 900i Manual do Utilizador Página 33