Compatible Systems MicroRouter 900i Manual do Utilizador descarregar pdf (Página 20)

20 - CNC Machine Installation - Section 3 Microrouter CNC Machine User's Manual

3: Dust Extraction & General Wood Precautions

3: Removal of Protective Coatings

Once your Microrouter has been sited and connected electrically, the

protective coatings and transit packaging must be removed to

prepare the machine for running:

1) The protective plastic sheeting on the guard windows should be

removed and the glass and perspex cleaned with an anti-static

cleaner.

2) Tie-wraps may be used in the working area of the machine, to

prevent movement of X axis components during transit.

To gain entry to the working area of the machine, power must be

supplied to the machine, in order to release the switch that locks

the safety guard door.

Insert the mains supply plug into an available socket, then power

up the machine using the square red on/off switch mounted on

the righthand side panel of the Microrouter cabinet. The on/off

switch will illuminate when power is being supplied to the

machine.

Cut and discard the tie-wraps.

3) Before using the machine, spray the slides and leadscrews with

the silicone lubricant (aerosol can) provided.

Dust Extraction Systems.

Your Microrouter is designed to run with a dust extraction system,

used to remove any potentially harmful wood dust particles from

within the working area of the machine.

The dust extraction system used should be independently tested to

ensure that dust is kept well below the maximum exposure limits set

by law. Denford can supply dust extraction systems for your

Microrouter, or you may wish to connect your own existing system.

The Microrouter should only be used with the dust extraction system

enabled.

Connect the pipe from your dust extraction system to the exit hole,

located in the top, rear corner of the left end of the Microrouter cabinet.

An adapter may be required, in order to obtain an efficient seal.

Warning.

The silicone lubricant

aerosol is extremely

flammable. Never use

the silicone lubricant

aerosol near a naked

flame, on any other

machine, or for any

other purpose.

Carefully read and

follow any instructions

or notices included with

the aerosol. Wear

safety glasses and a

suitable respiratory

mask when using the

aerosol.

Safety First!

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 93 94

Comentários a estes Manuais

Sem comentários

Compatible Systems MicroRouter 900i Manual do Utilizador Página 20

Comentários a estes Manuais

Manuais e produtos relacionados com Redes Compatible Systems MicroRouter 900i