Compatible Systems MicroRouter 900i Manual do Utilizador descarregar pdf (Página 51)

Section 7 - Maintenance - 51Microrouter CNC Machine User's Manual

7: Lubrication of Leadscrews

Location

X Axis Leadscrew Lubrication.

The X axis has two leadscrews, fitted to the front and rear slideframe

assemblies. The first leadscrew is visible on the front slideframe

assembly. The second leadscrew is located at the back of the

machine cabinet, partially hidden from view by the panel on the

slideframe assembly.

Run the machine head fully to the right, to gain access to the left end

of both leadscrews. Spray lubrication directly onto the exposed

surfaces of the leadscrews.

Run the machine head fully to the left, to gain access to the opposite

end of the leadscrews. Spray lubrication directly onto the remaining

surfaces of the leadscrews.

Finally, run the machine head left and right along the X axis, to

distribute lubrication along the full length of the leadscrews.

Look at front and rear

slideframe assemblies.

Lubricate along the

front (A) and rear (B)

leadscrews (arrowed).

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 93 94

Sem comentários

Compatible Systems MicroRouter 900i Manual do Utilizador Página 51