Compatible Systems MicroRouter 1200i Manual do Utilizador descarregar pdf (Página 21)

GORAMO – Janusz Górecki

MultiLink Router and MikroRouter

www.goramo.com.pl

age 21 from 41

Empty tab Bridges - no bridge to be established

After you create the bridge, br0 bridge is exactly the same, but until now has been eth1 interface (left

picture), after the addition of interfaces hdlc0, hdlc1 (configured in the mode hdlc-eth), br0 consists of

three interfaces. br0 IP address, is set as before, to the address taken from eth1 when you create the

bridge.

The bridge is treated from now on in the system as an interface br0. If you want to use a bridge

connection, you must first compile and then configure the rest of the software.

4.9

Configuring Modems

Currently supported modems are visible in the Modems tab. Modems tab and using modems has

been implemented in this way, so you can easily add new modems. Support for new modems can be

added to the software tab Software Update.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 40 41

Sem comentários

Compatible Systems MicroRouter 1200i Manual do Utilizador Página 21