Compatible Systems MicroRouter 1200i Manual do Utilizador descarregar pdf (Página 17)

GORAMO – Janusz Górecki

MultiLink Router and MikroRouter

www.goramo.com.pl

age 17 from 41

4.6.5 Configuring the Access Point (Type: Access Point)

If you want to configure the access point for the router:

• enter the devices tab

• select the network adapter configurations: wlan0, by clicking "More"

• in the network card configuration:

o option Type in the configuration set to Access Point

o in the SSID field, type the desired wireless network name

o if we set / change the modulation (default 801.11g)

o choose a free channel on which will be running the wireless network and change the

channel parameter.

• Select the option "Submit" to save settings for your wireless card (not on "Submit & Apply",

because this option would run the network before security settings)

• Set security:

o click on the "Wireless LAN Security Settings" option

o choose the parameter Encryption WPA-PSK (default None, None setting switch off

security)

o choose method of security (two types of WPA and WPA2 one), choose the safest

option is WPA2 (WPA2 Mixed))

o choose the form of a password, or at least 8 character string, or 64-bit number

hexagonal

o write down the root password (Pre-Shared Key)

o select the "Submit & Apply" which will cause the settings.

4.7

Tab interfaces - configuration of IP addresses

After setting up the equipment and modems, they are represented by the network interfaces. Available

interfaces are presented on the Interfaces tab.

After clicking on the option "More" on the right side of the line representing the network interface we

are interested, go to the configuration details.

Enable Interface if the interface is to be run

Configuration Type to choose: Network or Point to point

Each interface can operate as an interface to multiple computers on a network, or interface that

combines elements of only two computers. Of course, with each interface between two computers can

also be configured as a network interface (Configuration type: network).

4.7.1 Configuring point to point

Setting up a network of point to point is less interesting. Set in its IP address on the router (Local

IP) address of the computer and on the other side of the link (remote IP). Setting the mask is not used

in practice. Best to leave the value of 255.255.255.252

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 40 41

Sem comentários

Compatible Systems MicroRouter 1200i Manual do Utilizador Página 17